2019 Racing Completes
The new DK Swift series was created as an affordable start to the BMX experience for the track, the trails or cruising through the neighborhood. Each bike in the Swift collection features a strong and light aluminum frame, with steady geometry that is a little more forgiving for riders on the learning curve. Aluminum components like the 3-piece cranks, stems and rims team up with a blend of sturdy steel parts for a balance of weight, strength and nimble handling. The end result is a lightweight bike, allowing full control for the rider and easy for parents to lift into the car. Attention to details like all-terrain tyres and lightweight seat/post combos in sizes to match each model make these bikes perform without taking out a loan to pay for them. DK’s roots are in racing, but the DK Swift series bikes are as much at home on the local bike path as they are at the BMX track.
The new DK Sprinter Series bikes are designed for serious BMX racing at prices that will keep your budget on track. All the Sprinter models start with a proven 6061 aluminum frame: Light, responsive and sturdy enough to withstand the rigors of BMX. On the front end of each Sprinter, you’ll ﬁnd chromoly forks that can handle repeated harsh landings and keep you running straight out of the gate. All the Sprinters have sealed bearings throughout, linear braking systems and alloy cranks in different lengths to accommodate each size in the range. From the smallest Sprinter, the Micro, sporting an 18 x 1” wheel set, all the way up to the 24” Sprinter Cruiser, each bike in the collection features size speciﬁc speciﬁcations to accommodate riders for each class of bike. The smaller bikes see narrow tyres and aluminum bars, while the Pro size and up Sprinters feature chromoly bars and more tyre width to carry the weight of bigger riders, at speed. In terms of performance, quality and value, you’ll be hard pressed to ﬁnd better race bikes for the buck than the DK Sprinter series.
Professional - Coming December
As the name implies, the DK Professional series complete bikes are designed for premier level BMX racing, right out of the gate. All Professional models are ready for the race track, box-stock, with a size for every class. Created with advanced Airformed construction, the 6061 aluminum frames of the Professional series feature external Euro bottom brackets, integrated headsets and 3D 15mm dropouts. The low-proﬁle geometry of each frame size is crafted for speed and stability. The crucial front-end setup of the Professional series starts with Box carbon ﬁber forks with 20mm dropouts for the ultimate combination of strength and lightweight racing performance. From the sealed headset up, you’ll ﬁnd a CNC machined topload stem clamping tight to the DK chromoly race bars, in sizes proportionate to the frame size of each model. Promax brakes provide the stopping power, with forged aluminum 2-piece cranks putting the power to the ground. The wheelset of the Professional series is where things get rolling, and Maxxis DTH tyres put the rubber to the race track with minimal resistance and maximum traction. Sun Envy double-wall rims are laced to DK sealed bearing hubs, for smooth spinning, straight-line speed and lateral strength in the turns.. In the front, you’ll ﬁnd the stiff responsiveness of a 20mm through axle, while the rear hub is ready to snap out of the gate with a 15mm assette featuring 120points of engagement for instant response and transfer of power. When the race is over, ﬂip the quick-release seatpost clamp and raise the Box Echelon seat to cool down. If you’re ready to take your BMX racing seriously, look no further than the DK Professional series bikes.